|
Wide Chemical Compatibility Polypropylene Pleated Cartridge |
|
q
High Flow Rates And Dirt
Holding Capacity. q
Non-Fiber Releasing. q
100% Polypropylene
Construction, Suitable for Filtration of AWide Range of Aggressive Chemicals
And Solvents. q
All Polypropylene Parts,
Polypropylene Support Layer. With Thermal Welding to Minimize Extractable. q
Manufactured in a Clean
Room Environment (Class 10,000). q
All Materials Are FDA
Listed for Contact With Food And Beverages. q Cartridges Could Be Rinse-Up to 18 Megohm-cm in a Few Minutes. |
Retention Ratings
|
||
|
q
0.2, 0.25,
0.45, 0.8, 2, 3, 5, 10, 30um (Nominal) |
||
Dimensions
|
||
Length |
q
4" to
40" (101.6mm to 1016mm) |
|
Outer Diameter |
q
68mm |
|
|
Materials of Construction |
||
|
Filter Media |
q
Polypropylene |
|
|
Core, Cage |
q
Polypropylene |
|
|
O-rings/Gaskets |
q
EPDM, Viton,
Silicon |
|
|
Operating Conditions |
||
Max. Operating Temperature |
q
90°C |
|
|
Max. Forward Differential Pressure |
q
3.5 bar @
90°C q
5.5 bar @
50°C |
|
|
PLT Product Name |
5- Retention Rating |
10- Cartridge Length |
3 End Configurations |
E Materials of O-rings/gaskets |
|
Pleated-Flow |
0.2, 0.25, 0.45, 0.8, 2, 3, 5, 10, 30um Nominal |
4", 10", 20", 30", 40" |
No Symbol= Double open end 3 = SOE flat closed end, External 222 O-rings 8 = SOE fin end, external 222 O-rings 7 = SOE fin end, external 226 O-rings |
E = EPDM V = VitonS=Silicon
|